ResiLink™ All-Dielectric Drop Cable (36 or 48 Fibers)
Product description
All-dielectric flat drop cable (36 or 48 Fibers) for self-support, duct, or buried applications.
Resources
- Fiber Outdoor Ordering Guide
- Color Code Guide for Fiber Optic Specifications
- Fiber Code Addendum
- International Standards and Fiber Products Table
Part Numbers
US: F-DFD1JKT-24-B1-036-E3, F-DFD1JKT-24-B1-048-E3
Global: M-DFD1JKT-24-B1-036-E3, M-DFD1JKT-24-B1-048-E3
Features and Benefits
Easy Access Design
- The jacket can be easily opened with a knife
- The buffer tubes are easily separated from the jacket and strength members
- 36 or 48f: The 2.2 mm buffer tubes provide protection when routing fibers to the splice tray
All-Dielectric Messengers
- No bonding or grounding required
- Flexible and kink resistant
Dry Water-Blocking Technology
- Permits rapid cable preparation and termination
- Water-blocking materials are easily removed
Versatile Design
- Small cross-section and high strength provide good aerial performance
- Can be pushed or pulled through the duct
- Highly crush-resistant
Dual Strength Member Design
- More flexible than a single, all-dielectric rod of the same strength
- Easier to handle and coil than comparable all-dielectric figure-8 designs
- A great alternative where steel strength members are not permissible
High-Density Polyethylene Jacket
- Low-friction installation
- Excellent protection from environmental hazards
Sheath Markings: Provides positive identification and length verification
Performance
- Complies with Telcordia GR20 and ICEA 717
- BABA Compliance available upon request
Registered Supplier: ISO 9001, ISO 14001, TL 9000, and OHSAS 18001
