Anaconda® Type MP-GC EPR/CPE, Mine Power Feeder with Ground-Check
Part Numbers
16365.910200, 16365.910100, 16365.915100, 16365.915200, 16365.915300, 16354.396889, 16365.916000, 16362.279989, 16365.916500
Product Construction
Conductor: 2 AWG thru 500 kcmil annealed bare copper, Compact Class B strand
Extruded Strand Shield (ESS): Extruded thermosetting semi-conducting stress control layer over conductor
Insulation: Ethylene Propylene Rubber (EPR) insulation colored for contrast with black conducting layers
Extruded Insulation Shield (EIS): Extruded thermosetting semi-conducting layer, free stripping from insulation with color-coded (black, white and red) marker strip placed under the copper tape
Insulation Shield: Overlapped annealed copper tape
Ground-Check Conductor: Annealed copper Class B strand, insulated with yellow polypropylene
Grounding Conductors: Two coated annealed copper conductors, Class B strand
Jacket: Lead-cured Chlorinated Polyethylene (CPE)
Jacket Marking: PRYSMIANMI ANACONDA(R) [XX] [AWG/ KCMIL] 3/C TYPE MP-GC 15000 VOLTS P-07-KA110019 MSHA
Options: Colored jackets
Applications
- Provides high-voltage distribution intended for permanent installations
- Designed for use:
- In underground mining and boreholes
- In aerial installations, ducts or direct burial
Features
- Excellent heat, moisture, oil, corona, chemical and radiation resistance
- High dielectric strength
- Electrical stability under stress
- Low dielectric loss
- Triple extrusion forms a virtually perfect electrode, eliminating unequal electrical stresses
- Tough and reliable
- Highly resistant to tearing, punctures, abrasions, oil and flame
Compliances
- ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
- Meets flame test requirements and is accepted for listing by MSHA
- Approved by the Pennsylvania Department of Environmental Protection
Packaging
- Material cut to length and shipped on a non-returnable reel