Anaconda® Brand Type MP-GC (Uniblend® EPR) Mine Power Feeder with Ground-Check EPR/CPE

Anaconda® Brand Type MP-GC (Uniblend® EPR) Mine Power Feeder with Ground-Check EPR/CPE
Product description

Part Numbers

16365.910200, 16365.910100, 16365.915100, 16365.915200, 16365.915300, 16354.396889, 16365.916000, 16362.279989, 16365.916500

 

Conductor

  • 2 AWG thru 500 kcmil annealed bare copper, Compact Class B strand 

 

Extruded Strand Shield (ESS)

  • Extruded thermosetting semi-conducting stress control layer over conductor 

 

Insulation

  • Ethylene Propylene Rubber (EPR) insulation colored for contrast with black conducting layers 

 

Extruded Insulation Shield (EIS)

  • Extruded thermosetting semi-conducting layer, free stripping from insulation with color-coded (black, white and red) marker strip placed under the copper tape 

 

Insulation Shield

  • Overlapped annealed copper tape 

 

Ground-Check Conductor

  • Annealed copper Class B strand, insulated with yellow polypropylene

 

Grounding Conductors

  • Two coated annealed copper conductors, Class B strand 

 

Jacket

  • Lead-cured Chlorinated Polyethylene (CPE) 

 

Jacket Marking

  • PRYSMIAN® ANACONDA® BRAND (SIZE) 3/C TYPE MP-GC 15000 VOLTS P-07-KA110019-MSHA 

 

Options

  • Colored jackets are available
  • CSA compliance available upon request 

 

Applications

  • Provides high-voltage distribution intended for permanent installations
  • Designed for use:
  • In underground mining and boreholes
  • In aerial installations, ducts or direct burial

 

Features

  • Excellent heat, moisture, oil, corona, chemical and radiation resistance
  • High dielectric strength
  • Electrical stability under stress
  • Low dielectric loss
  • Triple extrusion forms a virtually perfect electrode, eliminating unequal electrical stresses
  • Tough and reliable
  • Highly resistant to tearing, punctures, abrasions, oil and flame 

 

Compliances

  • ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
  • Meets flame test requirements and is accepted for listing by MSHA
  • Approved by the Pennsylvania Department of Environmental Protection
  • Meets CAN/CSA C22.2 No. 96.1 Mine Power Feeder Cables 

 

Packaging

  • Material cut to length and shipped on a non-returnable reel