Anaconda® Brand Type SHD-GC Power Shielded Round Portable with Ground-Check EPR/CPE

Anaconda® Brand Type SHD-GC Power Shielded Round Portable with Ground-Check EPR/CPE
Product description

Part Numbers

16247.310100, 16247.315100, 16247.315200, 16247.615300, 16247.615400, 16247.616000, 16247.956200

 

Conductor

  • 1 AWG thru 350 kcmil coated annealed copper, bunched wires, rope-lay-stranded per ASTM B172 

 

Extruded Strand Shield (ESS)

  • Extruded thermosetting semi-conducting stress control layer over conductor 

 

Insulation

  • Ethylene Propylene Rubber (EPR) insulation colored for contrast with black conducting layers 

 

Insulation Shield

  • An extruded conducting layer covered by a conducting tape, and a flexible coated copper/textile braid shield overall, provides greater mechanical protection than an equal thickness of insulation 

 

Ground-Check Conductor

  • Annealed copper, rope-lay-stranded per ASTM B172, insulated with high-strength yellow polypropylene 

 

Grounding Conductors

  • Coated copper, rope-lay-stranded per ASTM B172
  • Two conductors in contact with the flexible copper braid shield 

 

Jacket

  • Reinforced, two-layer, extra-heavy-duty, lead- cured Chlorinated Polyethylene (CPE) 

 

Jacket Marking

  • PRYSMIAN® ANACONDA® BRAND (SIZE) 3/C TYPE SHD-GC 25000 VOLTS P-7K-102-046 MSHA 

 

Options

  • Colored jackets are available
  • TPU (Thermoplastic Polyurethane) jacket
  • Anamaxx® jacket 

 

Applications

  • Designed for use as a trailing cable on AC mining equipment:
    • Where service conditions are severe and maximum safety is mandatory (such as power shovels and draglines in open-pit mines, quarries, gantry cranes and slag reclaiming)
    • For high-voltage distribution in underground mines, where frequent relocation is necessary 

 

Features

  • Simultaneous extrusion and vulcanization of the strand shield, insulation and insulation shield form a virtually perfect electrode, eliminating unequal electrical stresses
  • Excellent heat, moisture, steam, oil, corona, chemical and radiation resistance
  • Flexible for easy handling
  • High dielectric strength
  • Electrical stability under stress
  • Low dielectric loss
  • Resists cutting, impact, abrasion, flame and sunlight
  • Excellent thermal stability and physical properties over a broad temperature range
  • The two-layer jacket is reinforced to provide maximum protection from mechanical damage, the cause of most portable cable failures 

 

Compliances

  • ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
  • Meets flame test requirements and is accepted for listing by MSHA
  • Approved by the Pennsylvania Department of Environmental Protection 

 

Packaging

  • Material cut to length and shipped on non- returnable reels